Light metal bracket with resilient contact surface. Mounting screw with 1/'' thread and tripod bush. Length: 16.5 cm (6.5 in.), Width: 2.8 cm (1.1 in.)

Collapsible. Grip with hand strap. Hinged camera bracket of light metal with resilient contact surface. Mounting screw with 1/'' thread and tripod bush. Length: approx. 14 cm (5.5 in.) Width: approx. 2.8 cm (1.1 in.) Height of grip: approx. 13.5 cm (5.3 in.)

Collapsible. Hinged camera bracket of light metal with resilient contact surface. Slot-on foot for flash units. Widened three-point rest on bottom side. Camera with mounted bracket stands firmly on flat surfaces. Mounting screw with 1/4“ thread and tripod bush. Length: approx. 16.2 cm (6.4 in.) Width: approx. 6.5 cm (2.6 in.) Height of grip: approx. 15.1 cm (5.9 in.)

For indirect flash illmuniation. Steplessly adjustable. With 1/4” tripod bush. Fits into accessory shoe or tripods. Height: approx. 45 mm (1.8 in.)

For indirect flashing. With ball-and-socket joint for stepless movement in all directions. Accessory shoe detachable. 1/4” mounting thread with lock nut. Reflector umbrella holder 9.2 mm diameter. For fastening to accessory shoe or stands. Stand thread 1/4” with removed slot-on foot 3/8”. Height: approx. 90 mm (3.5 in.)

For mounting flash guns with 1/4” thread. With threaded pin (1/4”) and lock nut. Height: 25 mm (1 in.)

For cameras with hot flash shoe and flash equipment without hot flash shoe. With synchro flash socket. Height: 16 mm (0.6 in.)

For cameras without hot flash contact and flash equipment with hot flash contact. With approx. 30 cm (11.8 in.) synchro cable, shoe mount and 1/4” tripod bush. Also designed for attaching flash equipment with hot flash contact on tripods. Height: 16 mm (0.6 in.)

For simultaneous use of up to three flash units with standard PC plugs

With plug to DIN 19 003 (PC) for self-fitting to flash cables. With soldering tags.

Professional flash connecting cable with spiral coil for pull relief. Signal red, length approx. 10 m (33 ft.)

Professional flash connecting cable with spiral coil for pull relief, jack 6.35mm Signal red, length approx. 10 m (33 ft.)

For connecting flash equipment. With right-angle plug and socket (PC).

For connecting flash equipment. With right-angle plug and socket (PC).

For connecting flash equipment. With right-angle plug and socket (PC).

For connecting flash equipment. With right-angle plug and socket (PC).

For connecting flash equipment. With right-angle plug and socket (PC).

For use in connecting flash equipment and as extension cord. Length (extended): 200 cm (6 ft.7 in.), PC plug – PC socket.

For use in connecting flash equipment and as extension cord. Length (extended): 200 cm (6 ft.7 in.), PC plug – PC socket.

Electronic flash trigger for lag-free firing of a second flash unit. No cord required. With hot flash contact. Range: 20 m (66 ft.), depending on the guide number of the flash unit in use and the brightness of the surroundings. With 1/4“ tripod bush Dimensions: approx. 29 x 40 x 38 mm (1.1 x 1.6 x 1.5 in.)

For simple attachment of lightweight lighting units. Removable accessory shoe on ball joint. Tiltable to all sides in infinite steps, lockable in any position. Additional connecting thread 1/4“. With reflector umbrella holder ø 9.2 mm. Clamp is impact-resistant plastic with non-slip rubber studs. Clamp span: max. 40 mm (1.6 in.) Height: approx. 90 mm (3.5 in.)

White, waterproof coated nylon fabric. For use as a reflector and for shoot-through lighting with small lamps. Rods chrome or nickel-plated. Diameter: approx. 37 cm (14.6 in.) Height: approx. 30 cm (11.8 in.) Rod-ø: approx. 7.9 mm (.31 in.)

Slide viewer with 2x magnifying lens for framed slides, 5 x 5 cm (2 x 2 in.), and uncut film strips in protective sleeves. Battery operation: 2 x 1.5 V C-size (supplied without batteries)

Slide viewer with 3 x magnifying double lens for framed slides, 5 x 5 (2 x 2 in.), and uncut film strips in protective sleeves. Drop chute with collecting tray. Battery operation: 2 x 1.5 V C-size (supplied without batteries)