5000 Kelvin color temperature. Uses special fluorescent tubes for high color fidelity. Color rendition index CRI = 90-100. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.

5000 Kelvin color temperature. high-frequency operating system(operating frequency approx. 40 kHz) for flicker-free start-up and operation. High-quality acrylic-glass plate of exceptionally uniform transmission over the entire visible spectral range. Robust, all-metal housing with non-slip rubber feet and the possibility to mount the light box on a wall. ON/OFF switch.

55 cm (21.7 in.) long gooseneck arm for cameras up to 600 g (21 oz.), ball head with 30 mm (1.2 in.) base and 1/4" camera thread. Universal table clamp with clamp range up to 30 mm (1.2 in.) on boards or 55 mm (2.2 in.) on tubes.

Daylight type lighting unit with two softlights for even and smooth illumination. Lights are tiltable and adjustable in height. Angle of vertical arms adjustable by lock joint. Separate control box. Lamps: 2 x 18 watt Color temperature: 5400 K CRI = 90-100

Daylight lighting unit high frequency with two softlights for even and smooth illumination. Separate control box .

Consists of two small softlights for even and smooth illumination. Interior reflector for high light output. Lights can be switched separately. Lamps fitted with 2 compact fluorescents 11 W, 6000 Kelvin, color rendition level 1B.

For fastening conventional flashes or lights with accessory foot at any point on the TopTable frame or in connection with Holding Arms 5936. With swan-neck holders.

For reflector size 50 x 21 cm (19.7 x 8.3 in.) To fit lighting units 5556, 5557, 5558, 5588, 5867 and 5868.

Fine structure acrylic glass. Can be mounted in conjunction with Filter Holders 5582 to Lighting Units 5556, 5557, 5558, 5588, 5867 and 5868.

Can be mounted in conjunction with filter holders 5582 to lighting units 5867,5868, 5556, 5557, 5558, 5588, 5867,5868, 5589, 5590, 5591, 5595 and 5656).

Flat and flexible plastic opaque plate for shooting with reflected light with holes on both sides and tightening cord. The plate can be bent in the desired shape and then be fixed by means of two ”beads” by choice of respective holes. Dimensions of flat plate: approx. 60 x 30 cm (23.6 x 11.8 in.)

Flat and flexible plastic transparent plate for shooting with reflected and backlight with holes on both sides and tightening cord. The plate can be bent in the desired shape and then be fixed by means of two ”beads” by choice of respective holes. Dimensions of flat plate: approx. 60 x 30 cm (23.6 x 11.8 in.)

Tiltable and rotatable reflector housing. Interior reflector for high light output. 55 cm (21.7”) swan-neck table clamp with 35 mm (1.4”) range. Lamp fitted with 11 W compact fluorescent tube, 6000 Kelvin, color rendition level 1B.

Miniature shooting table with a frame made of folded corrugated card board. Background made of pre-cut card board. The evenly curved background ("open tube" outline) improves the distribution of light on the subject. Dimensions (WxHxD, incl. background): approx. 50 x 30.5 x 43 cm (19.7 x 12 x 16.9 in.)

This shooting table is made of flexible plastic material is inserted into the assembled table and fixed by velcro fittings. The evenly curved background ("open tube" outline) improves the distribution of light on the subject. Side frames of the table provide attachment points for one or more lighting modules in vertical or horizontal position. Dimensions (WxHxD, incl. background): 77 x 60 x 84.5 cm (30.3 x 23.6 x 33.3 in.)

One or more modules can be attached in horizontal or vertical position. Adapter for vertical attachment is included. Aluminium housing with interior reflector, equipped with 36 watt daylight fluorescent lamp, high-frequency ballast. Mains cable with switch. Light emitting area: 45 x 6.4 cm (17.7 x 2.5 in.) (Replacement lamp: 5567)

Using the same technology from an umbrella this studio takes seconds to put up and take down! A pure white fabric – the same that is used for transmitted light umbrellas – serves for diffusion. A background cloth – one side Bluewhite, one side grey – comes with the studio and has a Velcro strip to attach it on the rear side of the tent. You may even use it outdoor. To prevent it from flying away in strong wind, it has “snow flaps” to put weights on.